Using the CardPlayer
2
Press the [Enter] button on the remote control.
CardPlayer shuts down and the following screen is displayed.
3
Remove the memory card from the card slot.
CardPlayer Basic Operation
CardPlayer has the following two operation modes:
• "Guide mode"
• "Quick mode"
"Guide mode" is the initial setting.
See "Setting Display Conditions and Operation Mode" to set the operation mode.
p.33
See "Quick Mode Operation" for operation of the Quick mode.
Easy Menu Operation (Guide Mode)
Here we will explain the procedures for playing scenarios and graphics using the
Easy Menu.
1
Press the [ ], [ ] [ ], or [ ] buttons on the remote control to position
the cursor on the file or folder you want to access.
If all the files or folders are not displayed on the current screen, press the [Page
Down] button on the remote control. The next page is similarly displayed by
placing the cursor on the "Next page" button and then pressing [Enter] button
Downloaded from:
: Displays the Easy Menu for file operation. Play files and set
options by selecting items in the Easy Menu.
: Plays files, opens folders, select slides to move during
scenario editing, and select the move destination by pressing
the [Enter] button on the remote control without using the
Easy Menu.
http://www.usersmanualguide.com/
EasyMP Operation Guide
22
p.24