Setting Display Conditions and Operation Mode
You can set the display conditions and operation mode for slideshow play. The
content for display conditions that can be set is: Continuous Play, Screen switching
time, Display order, Effect, and Mode switching.
1
Press the [ ], [ ], [ ], or [ ] buttons on the remote control to position
the cursor on the folder where display conditions are to be set.
2
Press the following buttons on the remote control depending on the
operation mode in use.
Guide mode
Quick mode
3
Set each of the items.
Enable settings by positioning the cursor on the desired item and pressing the
[Enter] button on the remote control.
Details for of the items are given below.
Downloaded from:
: Press the [Enter] button to display the Easy Menu. Select
"Options" on the menu, and press the [Enter] button.
: Press the [ESC] button to display the Easy Menu. Select
"Options" on the menu, and press the [Enter] button.
http://www.usersmanualguide.com/
EasyMP Operation Guide
33