Projecting Scenarios; Preparing A Scenario; Playing A Scenario - Epson EASYMP EMP-1705 Operation Manual

Projecting Scenarios

This section describes the method for playing scenarios stored in a
USB storage device, and the operations during scenario playback.

Preparing a Scenario

Create the scenario beforehand by using EMP SlideMaker2, and then
transfer it to the USB storage device connected to the projector by using
the "Send Scenario" function. s
While transferring the scenario you can set autorun and
q
continuous play.
s

Playing a Scenario

Procedure
A
Start PC Free. s
The contents of the USB storage device are displayed.
B
Tilt the [h] button on the remote control up to
position the cursor on the target scenario folder.
p.70
p.70
p.44
C
Press the [Enter] button on the remote control.
D
If "Advance" is set to "Automatically after", once
play has reached the end, it returns to the file list
screen. If "Repeat" is selected, the scenario is
repeated from the beginning.
See "Operating During a Presentation" for how to operate the
scenario when "Advance" is set to "On mouse click", and how to
stop and cancel.
• You can rotate JPEG format images in the scenario while
q
they are being projected.
• The movie files that are included in scenarios can be fast-
forwarded, rewound and paused during playback.
• The slide changing time for scenarios can be set using the
"Advance" command in EMP SlideMaker2.
Scenario file
s p.49
p.53
s
p.74
s
50