Setting, Monitoring And Controlling From A Computer; Changing Settings Using A Web Browser (Easyweb) - Epson EasyMP EMP-735 Operation Manual

Hide thumbs Also See for EasyMP EMP-735:

Table of Contents

Setting, Monitoring and Controlling from a Computer

When a computer and the projector are connected by a wireless LAN or by a wired

LAN, the following projector setting changes and administration are possible from

the computer via the network.

• Setting network functions and controlling the projector using a Web

browser. (EasyWeb)

• Monitoring and controlling the projector using EMP Monitor. (During

access point mode or Wired LAN connection mode connection).

• Obtaining projector status and network settings, controlling the projector,

and messaging errors using SNMPg and the SNMP manager program

(During access point mode or Wired LAN connection mode connection).

Here we will explain the above three methods.

You can setup and control the projector using the Web browser of a computer that is

connected to the projector via a network. Setup and control operations can be

performed remotely if this function is used.

Use Microsoft Internet Explorer 5.0 or later as the Web browser.

Tip :

• Setup and control are possible using a Web browser if "Standby Mode" is "Network

ON" in the "Advanced" menu of the projector's configuration menu, even if the

projector is in standby mode (when the Power indicator is lit orange).

• If the Web browser you are using is set up to connect via a proxy server, the EasyWeb

cannot be displayed. Please set the browser so it does not use a proxy server, if you

wish to view this page.

Downloaded from:

http://www.usersmanualguide.com/

EasyMP Operation Guide

Table of Contents