Epson EasyMP EMP-735 Operation Manual page 43

Setting, Monitoring and Controlling from a Computer
2
Click the "Resister projector" button during initial start-up after installing
the EMP Monitor, or to register additional projectors. Continue with Step
8 if all projectors are registered.
3
Click the "Auto detect" button.
The names of the projectors currently connected to the network are displayed.
Tip :
The manual registration function is expedient if the IP address of the projector is known.
Pressing the "Manual registration" button displays the following Manually register
projector screen. Input the IP address and click the "Confirm" button. Click the "Add"
button after the projector name is displayed. This adds the projector name to the
Register projector screen.
Downloaded from: http://www.usersmanualguide.com/
EasyMP Operation Guide
42