Animation Settings - Epson EasyMP EMP-735 Operation Manual

Creating and Sending a Scenario
4
After verification is complete, click the "
screen to close the Scenario Preview screen.

Animation Settings

In EMP SlideMaker2, PowerPoint animation effects and similar effects can be set
for each cell in the scenario. It is possible to set and project projection times and
animations for each divided frame for slides with animations set in PowerPoint.
In this case, right-click the desired animation in the Animation verification
window, then click "Cell Properties".
Tip :
Include files for animations set in advance in PowerPoint to produce smoother
animation when playing the scenario. To set animations in PowerPoint slides, we
recommend these be set within PowerPoint. Use the method described here to set an
animation in an image file, or to set animation in a slide included in a scenario without
maintaining the animation.
Downloaded from:
Stop
Stop play and return to the first slide.
Pause
Temporarily stops the slides when "Automatically" is
selected for the scenario.
Play
Starts the scenario preview. In addition, this restarts stopped
or paused scenarios. The following slide is displayed when
the scenario behavior is set to "On mouse click".
Rewind
Returns the slide to the one previous to the currently
displayed slide or returns the screen previous to the
animation being executed. The animation effects are not
performed upon return.
Fast
Shows the next slide (one after the current slide) or shows
Forward
the screen after animation execution. At this time the
(FF)
animation effects are not executed.
Volume
Performs volume control. Sets the level of the background
music.
Status Bar
Displays the state of progress of the scenario on a bar. At
first there is no bar display, and then the bar extends from
left to right as the scenario progresses. The scenario ends at
the rightward end of the bar.
http://www.usersmanualguide.com/
EasyMP Operation Guide
" button at the top right of the
15