Epson EasyMP EMP-735 Operation Manual page 7

Creating and Sending a Scenario
Tip :
Previously set content can be modified by "File" - "Properties".
Downloaded from:
Scenario
This becomes the file name and scenario folder name of the
Name
created scenario. This must be entered. Up to eight capital
letters and numbers can be entered. Keep this item and the
scenario folder directory in the next item to within a
maximum of 127 characters all told.
Scenario
Specify where to create the scenario folder to be used whilst
Folder
creating the scenario. A scenario folder is created in the
directory specified here.
Configure
Click to select to play background music during scenario
BGM
playback. The audio file (WAVE format) selection screen is
displayed if this is selected. On this screen, select the file to be
used as the background music.
After selecting the audio file, play the file by clicking the " "
button on the right.
Stop playback by clicking the " " button.
Background
Selects the background for graphic data in the scenario.
Color
Image
EMP SlideMaker2 changes each slide in a PowerPoint file to a
Quality
JPEG file and saves it. Use this item to select the image
quality to be used during conversion to JPEG files.
A characteristic of JPEG files is that, when the compression
ratio is high, image quality is worse than JPEG files of lower
compression. However, highly compressed files are smaller,
and take less time to project.
Using this setup item, the compression ratio grows
progressively higher going from "Highest image quality" to
"High Quality" and "Standard". Therefore, when "Highest
image quality" is selected, a high-quality, large JPEG file is
saved. When "Standard" is selected, the image quality is lower
than for the other settings, but the JPEG file is smaller.
If a JPEG file is included directly into a scenario, any of the
above image quality settings will become invalid for that
image, and the compression ratio of the original file is used.
http://www.usersmanualguide.com/
EasyMP Operation Guide
6