Projecting Scenarios; Preparing A Scenario; Playing A Scenario - Epson EasyMP EMP-1715 Operation Manual

Projecting Scenarios

This section describes the method for playing scenarios stored in a
USB storage device and the operations during scenario playback.

Preparing a Scenario

Create the scenario beforehand by using EMP SlideMaker2, and then
transfer to a USB storage device by using "Send Scenario". s
q While transferring the scenario you can set autorun and
continuous play.
s

Playing a Scenario

Procedure
A
Start PC Free. s
The contents of the USB storage device are displayed.
B
Tilt the [h] button on the remote control up to
position the cursor on the target scenario folder.
p.80
p.53
C
Press the [Enter] button on the remote control.
In Quick Mode, the file starts to play back.
In Guide Mode, the sub menu is displayed and you can tilt the [h]
button on the remote control to move the cursor to "Play Scenario",
and then press the [Enter] button. The scenario starts to play back.
p.80
D
If "Advance" is set to "Automatically after", once
play has reached the end, control returns to the file
list screen. If "Repeat" is selected, the scenario is
repeated from the beginning.
See "Operating During a Presentation" for how to operate the
scenario when "Advance" is set to "On mouse click", and how to
stop and cancel.
• You can rotate JPEG format images in the scenario while
q
they are being projected.
• The movie files that are included in scenarios can be fast-
forwarded, rewound and paused during playback.
• The slide changing time for scenarios can be set using the
"Advance" command in EMP SlideMaker2.
Scenario file
s p.57
s p.62
p.64
s
59