Projecting Scenarios; Playing A Scenario - Epson EMP-7850 Operation Manual

Projecting Scenarios

Here, we will describe the method for playing a scenario sent to a memory
card, operations during scenario playback, and editing a scenario.

Playing a Scenario

The scenario was sent to a memory card by the scenario sending function
in EMP SlideMaker2. s p.8
TIP
Autorun and continuous play can be set in the scenario.
PROCEDURE
1 Start the CardPlayer. s
This displays the content of the inserted memory card.
2
Tilt the [ ] button on the remote control to position
the cursor on the scenario folder that is to play.
3
Press the following buttons on the remote control
depending on the operation mode in use.
Guide mode:Press the [Enter] button to display the Easy Menu. Tilt
the [ ] button up and down, then select "Play
Scenario" and press the [Enter] button.
s p.8
p.16
Quick mode: Press the [Enter] button.
4 Play the scenario. If "Advance" is set to
"Automatically", once play has continued to the end,
control returns to the file list screen. If "Revive" is
selected, the scenario will repeat from the beginning.
See "Operation During a Presentation" for how to operate the
scenario when "Advance" is set to "On mouse click" and how to
cancel and stop.
TIP
Change the projection order and display/hide settings in the edit scenario
•
screen. s p.22
You can rotate JPEG format images when they are being projected during
•
s
scenario reproduction. p.19
EasyMP Operation Guide
21
Scenario files