Epson EasyMP EMP-735 Operation Manual page 47

Setting, Monitoring and Controlling from a Computer
9
It is possible to turn power ON/OFF and switch input sources for
registered projectors simultaneously. Select the projectors to be
controlled, and click the desired operation button.
To select all the registered projectors, click the "Select All" button.
Furthermore, just as in Windows file selection, it is possible to click the top of a
range, then click the bottom whilst pressing the [Shift] key on the keyboard to
select everything in between. Selection and deselection can be performed by
alternately clicking whilst pressing the [Ctrl] key.
Downloaded from:
Error data
If an error is detected for a projector, the status will be
displayed as one of the following icons.
http://www.usersmanualguide.com/
Lamp burnout warning
Replace the lamp.
the Lamp" in the User's Guide.
High-speed cooling in progress
Lamp problem
High internal temperature (overheating)
Internal problem
Fan error
Temperature sensor error
"Using the Indicators" in the User's Guide to
remedy problems.
46
EasyMP Operation Guide
See "Appendices - Replacing