Reset All Settings; Information - Club Car IQ Plus 2008 Maintenance And Service Manual Supplement

IQ DISPLAY MODULE (IQDM) SERIES 2 AND IQDM-P DIAGNOSTICS

RESET ALL SETTINGS

In the event that a mistake was made and one or more changes should not have been made with the handset,
the speed controller settings can be reverted to the original settings from the beginning of the session (when
the handset was plugged into the vehicle). This function is similar to the "undo" command on a PC and will
work correctly only when the handset has not been unplugged and power to the speed controller has not
been interrupted.
Resetting All Settings
1. During an active session when the settings need to be returned to the original values (the values that
were active at the beginning of the session), scroll to the functions menu and select.
2. Select settings.
3. Select reset all settings.
4. Press + on the change value button to confirm the operation.
5. The handset will display an "executing..." message for the next few seconds while the controller settings
are being stored in the handset's memory (Figure 12-3).
6. When the handset is finished resetting the speed controller settings, a confirmation message is dis-
played (Figure 12-6).

INFORMATION

The information menu is accessed by using the up or down arrow to scroll to information and pressing the
right arrow key to activate the menu.
This menu selection displays information pertaining to the speed controller. The information provided from
this menu selection includes the following items:
Model Number
Displays the model number of the speed controller.
Serial Number
Displays the serial number of the speed controller.
MFG Date
Displays the date the speed controller was manufactured.
Software Version
Displays the speed controller software version.
2008-2011 IQ Plus Electric Vehicle Maintenance and Service Supplement
12
Information
Page 12-17