iDPRT ID4 Series Service Manual page 46

ID4/IE4 Series • Service Manual
Applicable Module: iE4P/ iE4s
1. Turn the printer upside down on the desk, then unscrew the 2.0*5.0*6.0 screw and
remove the baffle and synchronized gear.
2. Manually remove the springs, then unscrew four 3.0*8.0 screws to separate the big gear
from the roll holder.
3. Place the front of the printer on the desk, manually remove the left and right roll holder.
Disassembling the module:
Replacing roll holder:
45
Rev:1.0