ID4/IE4 Series • Service Manual
Applicable Module: iE4P
1. Firstly,unscrew six 3.0*8.0 screws to remove the upper cover from the upper bracket.
2. Secondly, unscrew four 3.0*6.0 screws to remove the PCB cover from the upper cover.
3. Then unscrew four 3.0*6.0 screws, remove the LCD Bracket from upper cover.
4. Finally, take out the LCD and LCD screening glass.
Disassembling the module:
Replacing display:
26
Rev:1.0