iDPRT ID4 Series Service Manual page 33

ID4/IE4 Series • Service Manual
Applicable Module: iD4S
1. Unscrew six 3.0*8.0 screws, separate the upper cover from upper bracket.
2. Secondly, unscrew four 3.0*6.0 screws to remove PCB cover from upper conver.
3. Then unscrew two 2.5*6.0 screws, and take out the cable fastener.
4. Finally, unscrew two 3.0*6.0 screws, remove PCB board from upper cover.
5. Manually remove the feed button and LED.
Disassembling the module:
Replacing keypad:
32
Rev:1.0