iDPRT ID4 Series Service Manual page 11

ID4/IE4 Series • Service Manual
Applicable Module: iE4S
1. Firstly, open the top cover. Then press the TPH print header inward by hands and slide it down.
2. Remove the TPH cable from TPH.
3. Finally, unscrew the 3.0*5.0 screw and remove the ground wire from TPH.
Disassembling the module:
Replacing print header module:
Note: please refer to iE4S Print Head Module Quick Start Guide
Caution: Please do not touch the TPH in case of electric shock for TPH damage during
disassembling the print head.
10
Rev:1.0