Related Manuals for iDPRT SP320
Summary of Contents for iDPRT SP320
- Page 1 SP320 Thermal Label Printer User Guide Website: www.idprt.com Customer Service Email: technical@idprt.com...
-
Page 3: Packing List
⓫ Paper Sensor Packing List ● Unpack the printer and keep the packing materials in case you need to ship the printer in the future. ● Any damages exist, please contact the iDPRT team. Printer Power Cord USB Cable User Guide Thermal Label Note: The packing items are based on the order. -
Page 4: Paper Roll Loading
Paper Roll Loading Take out the paper holder. Push the cover open levers on the both sides with both hands to open the top cover upward. Load the paper roll to the paper Load the paper holder back to holder according to the following the printer. - Page 5 Pull out the paper roll, open the paper movable guides to the max-width and pass the paper through the paper movable guides, then adjust the paper movable guides to suit the paper width. Press down the printer cover. Cau�on: the tear bar of this printer contains a sharp edge.
- Page 6 Printer Connec�on Power Connec�on 1. Make sure the printer’s power switch is in the “off” posi�on. 2. Connect the power cord to the printer. 3. Connect the other end of the power cord to the outlet. 4. Connect the USB cable to the printer and PC. Power Cord ❶...
- Page 7 Windows Driver Instruc�on Driver Prepara�on for Windows Download the Windows Driver applica�on program in www.idprt.com Driver Installa�on for Windows Warning: Recommend to close the security so�ware before installa�on in case of preven�ng installa�on. 1. Select one interface to connect your printer to the computer.
- Page 8 figure (1). 2. Click “Paper Name”, choose the paper type as needed, figure (2). iDPRT SP320 ● Click “Manager” to add a new stock, figure (3)(4). ● Choose “Rotate” or “Effect”, it will be shown in the “Preview”, figure (5).
- Page 9 3. Click “Advanced” to set “Save Paper”, “Density”, “Speed”, “Test”, “Media Handling” and “Media Type”. 1) Save Paper 2) Density 3) Speed 4) Test 5) Media Handling 6) Media type...
- Page 10 1. Click “Start” → “Devices and Printers”. Right-click the icon and choose “Printer proper�es”, figure (A). 2. Click “General” → “Print Test Page”, and the printer will print labels with current se�ngs, figure (B). iDPRT SP320 iDPRT SP320 iDPRT SP320...
- Page 11 3. Click “Ports”, then choose the port needed, figure (C). 4. Click “Advanced” to set the available �me for the printer, figure (D). iDPRT SP320 iDPRT SP320 USB Virtual Port iDPRT SP320 Driver Removing Note: Please turn off the printer or unplug the USB cable before removing the driver.
- Page 12 Driver Installa�on for macOS Warning: Under different opera�ng systems, the screen has a slight difference. Please operate it according to the �ps. Take SP320 (macOS 10.15) as an example. 1. Double-click the Driver and click “Con�nue”, figure (a). 2. Select a des�na�on and click “Con�nue”, figure (b).
- Page 13 6. Turn on the printer and connect it to your computer (for example: via USB cable) 7. Click: Launchpad -> System Preferences -> Printers & Scanners, figure (g). 8. Under “Printer & Scanner”, printer SP320 is available, figure (h). iDPRT SP320...
-
Page 14: Troubleshoo�Ng
Feed Bu�on ● Switch mode When the printer is in the ready status, press and hold the feed bu�on un�l the blue indicator light or orange indicator light flashes twice, then release the bu�on and the printer will start the black mark label learning. The label and black mark label can be switched to each other. -
Page 15: Print Problem
Print Problem Problem Cause Solu�on 1. Common Speed se�ng error. Set minimum prin�ng speed by the control panel, quality problem drivers and so�ware to a�ain the best prin�ng of print. quality. Incorrect margins and Make sure the label size is correct before prin�ng. . paper size. - Page 16 Problem Cause Solu�on 4. Misalignment / The printer is uncalibrated. Calibrate the printer . skip label. Method 1: Tools --- "Automa�c label learning". Method 2: Press and hold the feed bu�on (top bu�on) un�l the blue light goes out twice and then release .. The tag format is incorrect .
- Page 17 Problem Cause Solu�on 8. The bar code The prin�ng is too dark or Adjust the concentra�on or print speed too light. The barcode does printed on the label properly. not meet the specifica�ons. can not be scanned. Leave at least 3.2 mm (1/8 inch) between There is not enough blank the barcode on the label and other printed space around the barcode.
-
Page 18: Fcc Warning
FCC WARNING This device complies with part 15 of the FCC Rules. Opera�on is subject to the following two condi�ons: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera�on. - Page 20 Manufacturer:Xiamen Hanin Electronic Technology Co., Ltd. Add: No.96, Rongyuan Rd., Tong’an District, Xiamen, China 361100 E-Mail: technical@idprt.com Web: www.idprt.com...