iDPRT ID4 Series Service Manual page 10

ID4/IE4 Series • Service Manual
Applicable Module: iE4P
1. Firstly, open the top cover. Then press the TPH print header inward by hands and slide it down.
2. unscrew two 3.0*6.0 screws and remove TPH from TPH bracket.
3. Remove the TPH cable from TPH.
4. Finally, unscrew the 3.0*5.0 screw and take out ground wire.
Disassembling the module:
Replacing print header module:
Note: please refer to iE4P Print Head Module Quick Start Guide
9
Rev:1.0