Maintenance; Introduction; Line Fuse Replacement - Tektronix KEITHLEY SourceMeter 2600B Series User Manual

Hide thumbs Also See for KEITHLEY SourceMeter 2600B Series:

Table of Contents

In this section:

Line fuse replacement .............................................................. 5-1

Fuse replacement .................................................................... 5-2

Front-panel tests ...................................................................... 5-3

Upgrading the firmware ............................................................ 5-4

Displaying the serial number .................................................... 5-6

Introduction

This section describes routine maintenance of the instrument that an operator can perform.

A fuse on the 2600B rear panel protects the power line input of the instrument. See the following

instructions to replace the fuse. You do not need to return your instrument for service if the fuse is

damaged.

Disconnect the line cord at the rear panel and remove all test leads connected to the

instrument before replacing a line fuse. Failure to do so could expose the operator to

hazardous voltages that could result in personal injury or death.

Section 5

Maintenance

Table of Contents

Do you have a question about the KEITHLEY SourceMeter 2600B Series and is the answer not in the manual?