Tektronix KEITHLEY SourceMeter 2600B Series User Manual page 59

Series 2600B System SourceMeter® instrument User's Manual
Event log descriptions
Column title
Sequence
Domain
Flags
Data
Accessing the event log from the command interface
You can access the event log from any remote command interface. The event log must be enabled
before LXI trigger events can be viewed. To enable the event log, send:
eventlog.enable = 1
To view the event log from a remote interface, send:
print(eventlog.all())
This command outputs one or more strings similar to the following:
14:14:02.000 17 Jun 2019, LAN0, 10.80.64.191, LXI, 0, 1560780842, not available, 0,
0x10,0x00
2600BS-900-01 Rev. A / August 2021
Description
Each instrument maintains independent
sequence counters:
▪
One for each combination of UDP multicast
network interface and UDP multicast
destination port
▪
One for each TCP connection
Displays the LXI domain number; the default value
is 0 (zero)
Contain data about the LXI trigger packet;
values are:
▪
1 - Error
▪
2 - Retransmission
▪
4 - Hardware
▪
8 - Acknowledgments
▪
16 - Stateless bit
The values for this are always 0 (zero)
Section 3: Instrument description
Example
0
16
3-43