Product Software And Drivers - Tektronix KEITHLEY SourceMeter 2600B Series User Manual

Series 2600B System SourceMeter® instrument User's Manual

Product software and drivers

Go to the Product Support and Downloads web page
and software for your instrument.
Available drivers and software include:
•
KickStart Software: Enables quick test setup and data visualization when using one or
more instruments.
•
Test Script Builder (TSB): This software provides an environment to develop a test program and
the ability to load the test program onto the instrument. Running a program loaded on the
instrument eliminates the need to send individual commands from the host computer to the
instrument when running a test.
•
IVI-COM Driver: An IVI instrument driver you can use to create your own test applications in
C/C++, VB.NET, or C# programming languages. It can also be called from other languages that
support calling a DLL or ActiveX (COM) object. Refer to
additional information.
•
LabVIEW
LabVIEW Software.
•
Keithley I/O layer: Manages the communications between Keithley instrument drivers and
software applications and the instrument itself. The I/O Layer handles differences in
communications required to support GPIB, serial, ethernet, and other communications buses so
that drivers and software applications do not need to handle the differences themselves.
To identify IP addresses of instruments that are connected to the local area network (LAN) and
support the VXI-11 discovery protocol, you can also use LXI Discovery Tool, available from the
Resources (lxistandard.org/Resources/Resources.aspx) page of the
(lxistandard.org).
2600BS-900-01 Rev. A / August 2021
™
Software drivers: Drivers to communicate with National Instruments
(tek.com/product-support) to download drivers
IVI Foundation (ivifoundation.org) for
LXI Consortium website
Section 1: Introduction
1-3