Table of Contents
Advertisement
Available languages
Available languages
8835548
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an unintended
purpose. Do not use the press after a shock load until a qualified
technician has examined the press.
2.
Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3.
The maximum load is 3 tons. Do not exceed this rated capacity. Never
apply excessive force to a workpiece.
4.
Check to ensure that all bolts and nuts are tight.
5.
Only use this shop press on a surface that is stable, level and not
slippery. The surface must be capable of sustaining the weight of the
shop press and the load.
6.
Keep hands away from the bed frame area at all times.
7.
Do not use the shop press to compress a spring or any other item that
could disengage and cause a potential hazard. Never stand directly in
front of a loaded press and never leave a loaded press unattended.
8.
Do not allow an untrained person to operate the press.
9.
Do not expose the press to rain, snow or inclement weather.
10. Workpiece may be sharp. After bending or cutting workpieces use
caution. Be aware of sharp edges or sharp shreds of metal that may be
created. Use heavy duty gloves when handling the workpiece.
11.
Do not use a breaker bar or pipe to increase leverage.
4
3 Ton Multi-Function Fabrication Press
For technical questions call 1-800-665-8685
V1.0
Advertisement
Table of Contents
