Aircraft Information - Maxi-Cosi Mico XP Manual

9
sewn
end
Check your child's fit often. If you cannot achieve a
snug harness fit for your child, see pages 22-26.
To learn how to check harness tightness, see pages
12-15.
Check the harness straps often for any wear or
damage.
The harness system must be installed
77
correctly. Do not use a child restraint with
damaged harness straps.
Attach 2nd Harness
Strap Loops to
Splitter Plate
• The sewn ends of the
harness strap loops Install the car seat in a window seat to avoid blocking
the aisle. If the aircraft lap belt is too short, ask the flight
must face towards
attendant for a belt extender.
you.
Use only on forward-facing aircraft seats.
• Do not twist the
harness strap or the
Contact the airline for their specific policies.
harness adjustment
Some airlines may ask to see a label stating that this car
strap.
seat is certified for aircraft use.
• Make sure the same
harness strap loops
are fitted completely
on both sides of the
splitter plate.

Aircraft Information

This restraint is certified for aircraft use.
There is an airplane certification
label located on the back of the car
seat as shown.
Rear-Facing Aircraft
Installation without Base
Follow pages 60-63.
You can only install this child
restraint in the aircraft without
the base.
78