Recheck Level Line
6
Redo the installation
if level line is not par-
allel with the ground.
7
Vehicle Belt
Install without
Base Finished!
Check the tightness of the
install often to make sure
it has not loosened.
63
Carry Handle Must
Be Upright and
Locked
Removing Seat Pad
You do not need to remove the harness system
to remove the pad.
To remove accessories, see pages 4-5.
Release Chest Clip
1
and Buckle
Pull Pad off Pad
2
Tabs
To release the pad
from the tab, pull down
on the pad and pull the
pad off the tab.
Repeat for the other
side.
continued on next page
64