Tightness Indicators - Maxi-Cosi Mico XP Manual

For LATCH: Lower Anchor Belt with Base Install | Page 45
• You must Lift the Release Lever in
order for the LATCH: Lower Anchor
belts to loosen.
• You must Push the Release Lever
Down in order for the LATCH: Lower
Anchor belts to tighten.
For Vehicle Belt with Base Install | Page 51
• You must Lift the Release Lever in
order to thread the lap belt or the
lap/shoulder belt under both the belt
path guides and the Lockoff.
• You must tighten the vehicle belt
BEFORE Pushing the Release Lever
Down to close the Lockoff.
• The lap belt or the lap/shoulder belt
must be completely under the belt
path guides and the Lockoff.
33

Tightness Indicators

This base has indicators that
show when the LATCH: Lower
Anchor or vehicle belt have
been securely tightened.
The red will turn completely
green when tightened
correctly.
showing.
For more information about how to tighten, see the base
install section you will be using:
LATCH: Lower Anchor Belt
with Base Install
Page 45
Vehicle Belt with Base Install
Page 51
No red should be
34