Removing & Installing Canopy - Maxi-Cosi Mico XP Manual

Removing & Installing Canopy
For wash and care instructions, see page 71.
Canopy Parts
Removing Canopy
• Using a screwdriver, press in
on the canopy tab locks on
the canopy post and pull the
canopy hoop off of the posts.
• Pull the canopy hoop out of
the canopy.
69
1
Canopy Hoop
(plastic strip)
Canopy Post
2
Installing Canopy
Thread Canopy
Hoop Completely
Through Channel on
the Front Edge of
Canopy
The canopy hoop has
an angle that will make
the canopy lean forward
when installed.
Make sure the angle is
correct when you thread
the canopy hoop into
canopy.
Attach Canopy
• Fit the back of the
canopy over the back
of the shell.
• Snap each plastic
strip end to each
canopy post.
70