Aircraft Information - Maxi-Cosi Mico Max 30 Instructions Manual

67
10 Attach 1st Harness Strap
Loops to Splitter Plate
The sewn ends of the harness
strap loops must face towards you.
Do not twist the harness strap or
the harness adjustment strap.
Make sure the same harness
strap loops are fi tted completely
on both sides of the splitter plate.
sewn
end
Check your child's fit often.
If you cannot achieve a snug harness fit for your child,
see pages 16-18.
To learn how to check harness tightness, see pages
26-28.
Check the harness straps often for any wear or
damage.
The harness system must be installed correctly. Do
not use a child restraint with damaged harness straps.

Aircraft Information

This restraint is certified for aircraft use.
Install the car seat in a window seat to avoid blocking
the aisle. If the aircraft lap belt is too short, ask the flight
attendant for a belt extender.
Use only on forward-facing aircraft seats.
Contact the airline for their specific policies.
Some airlines may ask to see a label stating that this car
seat is certified for aircraft use.
There is an airplane certification label
located on the side of this car seat as
shown.
Rear-Facing Aircraft
Installation without Base
Follow pages 56-60.
68