Vehicle Belt Install With Base - Maxi-Cosi Mico XP Manual

Vehicle Belt Install With Base

Before you begin installing the base into your
vehicle, did you check:
Your child's weight and height? See page 7.
Your child's fi t? See page 11.
1
Do not fully extend yet. Do not use the load
leg to adjust the base angle.
Review your vehicle owner's manual for load leg
use.
51
Unfold Load Leg
(On Select Models)
This is an optional
feature.
In a crash, load legs
reduce downward
rotation, limit rebound,
provide additional
stability, and energy
absorption.
Check Base Angle
2
The angle indicator will turn
completely green when
correct.
No red should be showing.
Adjusting the Base
If the angle indicator is not correct, adjust the
base foot. There are 3 positions.
• The adjustment handle is at the back of the
base.
• Squeeze the adjustment handle to release the
base foot.
• Then release the handle so the base foot locks
into one of the positions.
continued on next page
52