Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Maxi-Cosi Mico Deluxe
Summary of Contents for Maxi-Cosi Mico Deluxe
- Page 1 Mico Deluxe Mico Deluxe 4358-6508 4358-6508...
- Page 2 If you do not D-2 Vehicle Seating Position have your manual, download the manual D-3 Choosing LATCH or Vehicle Belts from www.maxi-cosi.com, email us at D-4 Knowing Your Vehicle Belts consumer@djgusa.com or call us at D-5 Using the Locking Clip 800-951-8182.
-
Page 3: Registration And Safety Notices
A-2 Registration and Safety Notices A-1 Thank You... ® Thank you for choosing this Maxi-Cosi base. The Please complete the postage-paid registration card ® Maxi-Cosi brand is part of the DJG family and is that came with your base, and send it to us. Child committed to creating a child restraint with the most restraint bases could be recalled for safety reasons. -
Page 4: Vehicle Seating Position
A-3 Understanding Your Base Failure to follow these warnings can result in the serious injury or death of your child. To help you recognize instructions which are most critical to your child’s safety, we use this symbol: B-1 Vehicle Seating Position Never place a child rear- facing in a seating position with an active frontal airbag. - Page 5 C-1 Remove and Install the Child This base should be securely belted Restraint to Base in the vehicle even when not in use. In a crash or sudden stop, an unsecured base To Remove Child could injure occupants. Restraint from Base Do not use a base that has been in a From the back of the crash.
- Page 6 C-2 Reclining the Base C-3 Base Use This base is to be used rear-facing with children weighing 5-22 lbs (2.3-10 kg) 19-29 inches To Adjust the Base tall (48-74 cm). NOTE: If your child does not meet the criteria for the From the back of the Rear-Facing position, do not use this base.
-
Page 7: Understanding Your Vehicle
D-2 Vehicle Seating Position D-1 Understanding Your Vehicle Your vehicle’s features may be considerably Some vehicles do not have a seating position different than those pictured here. Consult your that can be used safely with this base. If you are vehicle owner’s manual to help identify your not sure where to place the base in your vehicle, vehicle’s specific features and locations. -
Page 8: Safety Tip
D-3 Choosing LATCH or Vehicle Safety Tip: Belts Children are safer when properly The LATCH LATCH Anchor Bars restrained in rear System seating positions LATCH (Lower Anchors than in the front seating positions. and Tethers for CHildren) is a universal system for According to National Highway Traffic installing bases without Safety Administration information,... -
Page 9: Knowing Your Vehicle Belts
Vehicle Belts Vehicle Belts • Automatic/Passive vehicle seat belts If LATCH is not an You MUST have a vehicle lap belt to install any option, you must use base with the vehicle belts. An automatic (passive) the vehicle seat belt shoulder vehicle belt may or may not have a separate system to install the vehicle lap belt. - Page 10 To determine if you have this Vehicle Latch Plates type of vehicle belt, gently pull • Check the Latch the vehicle belt all the way Plates on Your Lap out of the retractor (spool), let Locking and Shoulder Belt it return several inches, then Latch pull on it again.
-
Page 11: Using The Locking Clip
D-5 Using the Locking Clip Place Base in Vehicle Rear-Facing You will rarely need to use a locking clip Thread vehicle lap belt except for in some older vehicles. Built in child through the belt path restraint locking systems have been required as shown. - Page 12 D-6 Installing on Aircraft Attach Locking Clip Thread both portions This base is certified of the vehicle belt onto for aircraft use. the locking clip, as close to the latch plate as Use only on forward- possible. facing aircraft seats. Follow instructions for Position Locking vehicle installation.
-
Page 13: With Latch
E-1 Rear-Facing Installation with Base Never place a child rear-facing in a seating position with an active frontal airbag. This can result in serious injury or death. This base must always face the rear of the vehicle when installed. E-2 Preparing to Install Base with LATCH LATCH Belt Lap/Shoulder Belt... - Page 14 Connect LATCH to E-3 Installing Base with LATCH Vehicle LATCH Anchor Fasten one LATCH belt See your vehicle owner’s manual for information on connector to the anchor designated LATCH positions, anchor locations and in the vehicle seat anchor weights. located in the vehicle seat bight.
- Page 15 Check LATCH Belt Tightness Failure to securely attach child restraint to Grasp the base at the base can result in serious injury or death. belt path with one hand. Push and pull the base Check for Proper from side to side, forward Recline and back.
-
Page 16: Installing Base With Vehicle Belts
Place Base in Vehicle E-4 Installing Base with Rear-Facing Vehicle Belts Center the base in the chosen seating position. Do not use the LATCH system along Thread Vehicle Belt with the vehicle lap or lap/shoulder belt. Store LATCH belts when using the Thread the vehicle lap vehicle belts. - Page 17 Check Vehicle Belt Tightness Failure to securely attach child restraint to Grasp the base at base can result in serious injury or death. the belt path with one hand. Push and pull the Check for Proper base from side to side, Recline forward and back.
-
Page 18: Warranty
Warranty Limitation of warranties and other warranty terms and state law rights: Any implied warranties, including implied warranties of Dorel Juvenile Group, Inc. (DJG) warrants this product to the merchantability and fitness for a particular purpose, the original retail purchaser as follows: shall be limited to the duration and terms of the express This product is warranted against defective materials written warranty.