Maxi-Cosi Mico XP Manual page 27

Only if necessary, you may need to place a tightly
rolled towel(s) or foam pool noodle(s) under the back
of the base to help get the correct angle. Check the
padding often to make sure it is still in place.
3
4
Attach Connectors to Vehicle Anchors
47 Review your vehicle owner's manual for LATCH:
lower anchor locations and LATCH: lower anchor use.
Lift Release Lever
You must Lift the
Release Lever in order
for the LATCH: Lower
Anchor belts to loosen.
Release LATCH:
Lower Anchor
Connectors from
Storage Location
• Press in red button.
Push connector into
storage location.
• Then pull it and the
belt out.
Push Release Lever
5
Down
You must Push the
Release Lever Down
in order for the LATCH:
Lower Anchor belts to
tighten.
Push Down on Base
6
to Tighten LATCH:
Lower Anchor Belts
The belts will begin to
automatically retract and
tighten as you push down.
Check Tightness
Indicators
The red will turn
completely green
when tightened correctly.
No red should be showing.
You may need to adjust the base foot into another
position for the tension indicators to turn completely
green. See step 2.
continued on next page
48