Removing Seat Pad Set for Cleaning
26
1
Locate Headrest Pad
Fasteners on Back
of Headrest & Undo
Them
2
Locate Elastic Straps
on Headrest Belt-
Positioning Guide
Release them from each
belt-positioning guide.
3
Gently Pull
Headrest Pad
off Headrest
4
Locate Backrest Pad
Fasteners on Back
of Backrest & Undo
Them
5
Gently Pull Backrest
Pad Off Backrest
6
From Back of Seat,
Undo Fasteners &
Pull Seat Pad Off of
Armrests & Seat
Do not use booster seat without the
seat pad. Failure to do this can result in
serious injury or death.
Cleaning & Installing Seat Pad Set
Machine wash separately with cold water on
a gentle cycle. Do not use bleach. Tumble dry
separately for 10-12 minutes on low heat. Remove
immediately.
1. From Front of Seat, Pull Seat Pad Onto Seat &
Over Armrests
2. Gently Fit Backrest Pad Onto Backrest &
Attach Backrest Pad Fasteners to Back of Backrest
3. Gently Fit Headrest Pad Onto Headrest
a. Fit the elastic straps onto the headrest
belt-positioning guides.
b. Attach the headrest pad fasteners to the back
of the headrest.
27