Table of Contents
Advertisement
installation dimensions
depth: minimum 22" needed for proper installation
overall
height
67"
height
to center
of
bypass
57-1/2"
tank
height
54"
weight dry: approx 185 lbs
weight wet: approx 325 lbs
due to variations in installations, length and sizing needed for pipe connections to and from the system (see flexible requirement) and drain line are not supplied
flexible Connections Required:
Stainless steel corrugated water connectors, PEX or PvC Sch 40 have a flexible capability that may assist with issues where the
rough and finish measurements are slightly off or where pressure surges/spikes or back pressure occur. this flexible connection may
prevent tank and valve issues where rigid or hard pipe create problems over time. this is a requirement of the tank manufacturer
and is stated on the label affixed to every tank. Perform all plumbing according to state or local codes.
Drain Line Air Gap Required and Spring Check Highly Recommended:
Please see information for proper drain line installation in the Product and Installation guide
Complete setup, install and startup of these systems can be found in this Product and Installation Guide
- Model #'s eWs-IroN-1054-A, eWs-IroN-1354-A
for Illustration Purposes Only:
On-Site Assembly Required
due to shipping weight for all Iron systems,
tank, all tank contents and valve must be assembled on site.
Please review the simple steps for proper assembly.
Pictured:
eWs-IroN-1054-A
Valve (front view)
Not pictured:
electric Transformer,
bypass Valve and
Adaptors to the rear
of the Valve.
All measurements
are approximates
and system
heights may
have
variances
up to 1".
CAUtIOn:
If installing other
equipment in addi-
tion to this Iron sys-
tem - see Page 18 in
the service Manual
for proper order of
installation
tank width 10"
depth: minimum 22" needed for proper installation
overall
height
67"
height
to center
of
bypass
57-1/2"
weight dry: approx 280 lbs
weight wet: approx 500 lbs
*Not Supplied:
Pictured:
eWs-IroN-1354-A
tank
height
54"
self leveling
base
tank width 13"
Corrugated flexible stainless not supplied
4
Valve (front view)
Not pictured:
electric Transformer,
bypass Valve and
Adaptors to the rear
of the Valve.
For Illustration Purposes only:
Advertisement
Table of Contents
