Schematic: Valve, Bypass, Controls - All Systems - Environmental Water Systems Spectrum CS-EWS-1354-7000 Installation Manual

Whole home water filtration
Table of Contents

Advertisement

SCHEMATIC: ALL SYSTEMS - Valve, Bypass, Adaptors and Valve Controls
ALL SYSTEMS: Illustration of Complete Valve Assembly, Bypass and Provided Adaptors: 18" Overall Length Front to Back
removable
valve
cover
valve
1" MNPT
controls
drain fitting with
grey clip
model number
and labeling
NOTE: a total of seven (7) red connection clips are
A (1) - clip, top cap assembly, B (2) - clips, valve to bypass, C (2) - clips, bypass to adaptors, D (2) - clips, bypass assembly
**WARNING:
Removal of any red clip while unit is under pressure will result in water damage and damage to valve. See other cautions within this manual.
Outlet Valve
Closed
What is normally seen on the display:
Current Time of Day in Data Display
PM Indicator (if applicable)
Data Display will alternate (every 10
seconds) between Time of Day to another
number and then back to the Time of Day
- this is normal and tells the user the next
time the system will backwash counting
down each day from 6 (factory pre-set) until
backwash
In Service Icon
valve body
A
7' electric cord &
24v transformer
(not shown)
used**
Supplied Bypass Valve - All Systems
BYPASSED
OUTLET
No Flow Into System
Valve Controls - All Systems
Error
Information
Icon
In Service
Icon
Programming Icon
built-in bypass
D
B
B
B
valve to bypass
clip connections
Top View
INLET
OUTLET
Incoming
Filtered
Water
Water to
Supply
Home
Outlet Valve
Open
Inlet Valve
Closed
Flow of Filtered
Water from System
Data
Parameter
PM
Display
Indicator
Display
Extra Cycle
Up
Down
Button
Button
Button
1", 1 1/4" & 1 1/2"
MNPT adaptors provided
C
C
D
C
bypass to adaptors
clip connections
IN SERVICE
INLET
Incoming
Water
Supply
Inlet Valve
Flow Into System
to be Filtered
During Installation when instructed:
Use the Up and/or Down Button to set
the Time of Day
Use the Extra Cycle Button to flush the
system. The Parameter Display will appear
and indicate the cycle engaged ("BW" or
"RR") during backwashing and the Data
Display will indicate time remaining during
a cycle
Contact EWS Customer Service if you see
an Error Icon or have wandered into a Pro-
gramming Mode that you do not understand.
3"
on center
Open
4

Advertisement

Table of Contents
loading

Table of Contents