Product Blow-Out (For Illustration Purposes) - Environmental Water Systems EWS-IRON-1054-A Product And Installation Manual

Iron removal systems
Table of Contents

Advertisement

parts breakdown - iron systems
Brass Line flow Control:
Install on outgoing line
in proper flow direction
Adaptor 1":
direct threaded attachment to
the bypass for 3/4" up to 1-1/4"
main water lines.
Bypass:
direct threaded attachment to
the back of the valve. no tools
or plumber installed bypass
needed. shown in closed po-
sition
Below represents a fully assembled
system from a front view.
Sizes will vary based on model
NoTe:
Unlike other systems, Iron Systems come with an air injector installed on the drain side into the brine line. Iron Systems do
not come with 1-1/2" Adaptors due to the air injection and oxidation capability and do not come with an Upper valve Screen.
CAUtIOn: If installing other equipment in addition to this Iron System - see Page 18 in the Service Manual for proper order of installation
(for illustration only)
Brass Spring Check:
Install on incoming line
in proper flow direction
Riser Distribution ORing
Valve Tank ORing
Tank:
10" x 54" for 1054 system (pictured)
13" x 54" for 1354 system
Food & beverage grade, non-corro-
sive, one-piece, blow-molded poly-
ethelyene interior with structured
fiberglass outer laminate.
2.5" opening:
note - Freeboard:
top 1/3 of tank is empty for proper backwash
and lift of filtration media for the automatic self
cleaning of the system
filtration:
eWs proprietary, high grade, iron reduction
media. no binders, fillers or metal resins
1054 system:
1.5 cu.ft.
1354 system:
2.5 cu.ft.
Underbed:
Specific pea gravel materials for proper water
and backwash flow and distribution
1054 system:
20 lbs..
1354 system:
30 lbs.
Valve - Inlet Side
Valve - Outlet Side
front View;
Touch Screen Valve
2.5" valve base: all Iron systems
self leveling base
Injection:
Drain Adaptor (dlFC)
Oxidation or air
into brine line
Drain flow Rates:
1054 - 8gpm,
1354 - 12gpm
All systems:
draw cycle for oxidation
40 minutes @ .25gpm
Drain (grey) Clip:
secures drain adaptor to
valve drain port
Note: drain line to properly
air gapped location is not
supplied by EWS
electric:
12 volt plug & play transformer with 9' cord
note: valve consumes the power equal to
a doorbell
Tank wrap:
eco-cover for tank with contact
infomation and information impor-
tant for the proper application of
the system.
Riser::
With upper diffuser used
with air injection valve
Food & beverage rated
pvc water distribution
riser with lower screen
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ews-iron-1354-a

Table of Contents