Table of Contents
Advertisement
other buttons you can push on the screen
mon
10:30 am
Vacation Mode
Contact:
Press the button and a new screen appears with EWS customer service contact information.
diagnostics:
Press the button and new screen appears with your current flow rate, a peak flow rate the
system has encountered and the amount of gallons that have passed through the system.
Note: Flow rate may determine if a leak is occuring in your home.
Settings:
Press the button and a new screen appears indicating the default backwash of every 6 days, the
time of that backwash is 1:00am. the last line is water hardness that is non-applicable to this filter
system. you can adjust and shorten the number of days between backwashes (default is 6) and what
time you want that backwash to occur as long as there is no conflict with any other system(s).
Cycle:
Press the button and a new screen appears that allows you to manually backwash your system.
there are many features that can be accessed to save water, determine water flow, longevity of the filter and change
Home: Press and return to the
X
water Treatment
treatment
custom
diagnostics
Contact
times. Please contact EWS Customer Service for more information.
Home screen
: Press and go back to the
previous screen
4000
1667
G
G
Cycle
settings
Advance: Press and advance to
Check: Press and Ok the setting
Vacation Mode:
Press the button and vacation
Mode will be in the upper right box.
the system will not backwash until
the button is pressed again and
the upper right box returns to the
normal setting.
Note:
Press the button upon your return.
The upper right screen will return
to 1667 g and backwash when you
use 1,667 gallons of water or on
the 6th day whichever comes first.
recommended:
upon return from vacation, press
recycle button to begin a back-
wash to refresh the filter for you.
the next cycle
or change and moves to
the next screen
16
Advertisement
Table of Contents
