Table of Contents
Advertisement
Software
Each ALMEMO ® Manual is accompanied by the AMR-Control software pack-
age, which can be used to configure the measuring instrument, to program the
sensors, and to read out from the measured value memory. Using the integrated
terminal, measuring operations can also be performed online. The WINDOWS ®
software package WIN-Control is provided for the purposes of measured value
acquisition via networked devices, for graphical presentation, and for more com-
plex data processing.
INITIAL COMMISSIONING
6.
1. Connect sensor to socket M0 (1); see 8.
2. Ensure that the power supply is provided via 3 AA batteries or mains adapter;
3. Switch ON by pressing key
4. Select measuring channels by pressing key
values (5e); see 10.1.1.
5. Save the measured value by pressing key
6. Relative measuring with respect to a reference value or sensor adjustment
by pressing key
holding down key
7. Differential measurement (2490-2A only), plug 2 sensors of same type into
sockets M0 and M1 and then select measuring point M2; see 10.6
8. Evaluating a measuring operation
Call up maximum / minimum values by pressing keys
To delete max. / min. value(s) press and hold down key
9. Programming or data output via interface (not type L)
Connect computer via interface cable to socket A1; see Manual 5.2.
Activate supplied software ALMEMO
Via 'Setup interface' set the COM port and transmission rate to 9600 bauds.
Program the sensors via 'Program measuring point list'.
Measured value display and sensor adjustment via ´Measuring points - Meas-
ured values´
Data logging on the computer :
Program the cycle via ´Devices - Programming´
Open the terminal window via ´File - Terminal´
´File - Terminal - Open log ´, enter file name, ´Save´
Start the measuring operation by click ´Start´
Stop the measuring operation by click ´Stop´
´File - Terminal - Close log´
Activate file e.g. from MS-Excel and import using ´;´ as separator;
ON
(6) ; see 7.5.
CLR
(6); return to normal measured value by pressing and
CLR
see 10.4.
M▲
(6), read out measured
MEM
(6) see 10.3.
®
Control.
6. Initial commissioning
MAX
MIN
/
(6)
MAX
MIN
or
;
13
Advertisement
Table of Contents
