Table Of Contents - AUMA SAEx 07.2 Manual

Table of contents

Read operation instructions first.
Observe safety instructions.
These operation instructions are part of the product.
Store operation instructions during product life.
Pass on instructions to any subsequent user or owner of the product.
Target group:
This document contains information for assembly, commissioning and maintenance staff.
Reference documents:
Manual (Operation and setting) of actuator controls ACExC 01.2 Modbus
Manual (Fieldbus device integration) of actuator controls ACExC 01.2 Modbus
Reference documents are available on the Internet at: http://www.auma.com.
Table of contents
1. Safety instructions.................................................................................................................
1.1. Prerequisites for the safe handling of the product
1.2. Range of application
1.3. Warnings and notes
1.4. References and symbols
2. Short description...................................................................................................................
3. Name plate..............................................................................................................................
4. Transport and storage...........................................................................................................
4.1. Transport
4.2. Storage
5. Assembly................................................................................................................................
5.1. Mounting position
5.2. Handwheel fitting
5.3. Mount actuator to valve
5.3.1. Overview of output drive types
5.3.2. Output drive type A
5.3.2.1. Multi-turn actuator with output drive type A: mount
5.3.2.2. Stem nut for output drive type A: finish machining
5.3.3. Output drive types B/C/D and E
5.3.3.1. Multi-turn actuator with output drive type B: mount
5.4. Accessories for assembly
5.4.1. Stem protection tube for rising valve stem
6. Electrical connection.............................................................................................................
6.1. Basic information
6.2. Overview of AUMA electrical connections
6.3. KT/KM electrical connection
6.3.1. Terminal compartment: open
6.3.2. Cable connection
6.3.3. Fieldbus cables: connect
6.3.3.1. Fieldbus connection for line topology
6.3.3.2. Fieldbus connection for loop topology
2
SAEx 07.2 SAEx 16.2/SAREx 07.2 SAREx 16.2 Control unit - electromechanical
ACExC 01.2 Intrusive Modbus RTU
Page
5
5
6
7
7
8
10
14
14
16
17
17
17
17
18
18
19
21
22
23
24
24
25
25
27
28
29
30
33
33
35