Pari eFlow rapid Instructions For Use Manual page 17

• Connect the connection cord (8) to the
nebuliser handset.
• Connect the connection cord (8) to the
controller.
®
eFlow rapid - 2021-04
• Place the nebuliser handset on a firm,
flat surface.
• Add the dosing of medication prescribed
by your doctor to the medication reser-
voir.
WARNING:
Ensure that the medication is filled no
higher than the upper scale graduation
8
mark (6 ml). Do not overfill under any
circumstances!
Info:
If you intend to inhale several medica-
tions one after the other, rinse all
nebuliser handset parts thoroughly
with warm tap water before refilling.
8
• Close the medication reservoir.
en
13