Table of Contents
Advertisement
Tare Weight Entry (Tare weight is known)
1. In Gross Weight mode (GROSS annunciator on), press the TARE key.
2. Display will show
3. If weight displayed is acceptable, press ENTER key to save it. Otherwise, use the
numeric keys to enter a new tare weight. Note that when entering tare weights, a
maximum of 4 digits can be entered and the numbers advance from right to left in the
display. The number of leading or trailing zeros required to obtain your desired tare is
dependent upon the DIVISION VALUE selected in the setup procedure.
For example:
4. After the new tare weight has been entered, press the ENTER key.
5. Display will show a minus Net weight and NET annunciator will turn on.
6. Press the ID/HEIGHT key.
7. Display will change to show
8. Using numeric keys, enter up to a 14-digit alpha numeric identification number.
9. Press the ENTER key.
10. Assist patient onto scale.
11. When weight is stable (STABLE
12. If a printer is connected to scale, press the PRINT key to print a ticket.
13. Assist patient off scale.
OPERATION, CONT.
or previously entered tare and TARE annunciator will turn on.
Division Value:
Desired Tare Value:
Key Sequence:
.
annunciator will turn on), read weight display.
8555-0530-0M Rev E MedVue MV2 Owner's
0.2 kg
10.6 kg
1 0 6
17
Advertisement
Table of Contents
