Detecto MedVue MV2 Owner's Manual page 18

CAL
The CAL annunciator will be turned on after pressing the calibration switch to show that the
MV2 is in the Setup and Calibration mode.
kg
The kg annunciator is turned on to indicate that the displayed weight is in kilograms.
cm
The cm annunciator is turned on to indicate that the displayed height measurement is in
centimeters.
mm
The mm annunciator is turned on to indicate that the displayed height measurement is in
millimeters.
AM
The AM annunciator is turned on to indicate that the displayed time is before noon.
PM
The PM annunciator is turned on to indicate that the displayed time is after noon.
The annunciator is turned on to indicate that the displayed value is the time.
BMI (Body Mass Index)
The BMI annunciator is turned on when displaying the calculated body fat.
Wi-Fi RS232
NOTE: These annunciators are turned on when optional hardware is installed and in use.
12
ANNUNCIATORS, CONT.
Ethernet USB
8555-0530-0M Rev E MedVue MV2 Owner's