Ncontrol Feature - Detecto MedVue MV2 Owner's Manual

Medical weight analyzer

Hide thumbs

Table Of Contents

Table of Contents

Standard Function Keys

The 0 through 9 keys are used to enter alphanumeric data

during the setup and calibration as well as during normal

operation of the MV2.

To enter letters, you must press the key in succession until the

desired letter is displayed. This is similar to the way early cell

phone keypads operates. (Ex: If you want to enter the letter C,

you would need to press the 2 key four times).

NOTE: The 0, 1, and 7 keys have dual functions. They are used to enter numeric data during

setup and calibration as well as during normal operations. In addition, the 0 and 1 keys are

used to select no (0 = NO) or yes (1 = YES) to various prompts.

The 7 key is used to activate the Sleep mode feature. Pressing and holding the 7 key for

approximately 3 seconds will initiate the sleep mode to conserve power while the MV2 remains

unused. Sleep Mode requires the MV2 to remain at a stable zero weight. When enabled, the

display will show the date and time and the backlight will be turned off. Weight placed on the

scale or pressing any key will activate the MV2 and return it to weight mode.

This is the CLEAR (BACKSPACE) key. It is used to clear an incorrect entry

from the display without processing the data. If an incorrect entry is made,

press this key and re-enter the correct data. When entering the ID, pressing

this key will act as a "backspace" key (it will back up one space and delete the

character in that space). NOTE: The CLEAR key must be pressed before the

ENTER key to ensure the data is not processed.

This is the ENTER key. It serves two purposes. First, during setup, pressing

the ENTER key will accept the current displayed setting of the parameter.

Second, the ENTER key is used to signal completion of the entry of data (in

both setup and operation) and causes the scale to process the data entered.