Pci Configuration - DTK PRM-0075I User Manual

Chapter 4
Reload Global Timer Event: When Enabled, an event occurring on each device listed below
restarts the global time for Standby Mode:
IRQ[3-7,9-15], NMI
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
Floppy Disk
Serial Port
Parallel Port
4.6

PCI CONFIGURATION

The PCI Configuration Setup option is used to configure the PCI add-on Cards on PCI
Slots. Without proper setup the PCI Add-on Cards might not function properly.
PNP OS Installed
Resources Controlled By
Reset Configuration Data
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
DMA-7 assigned to
Note: Change these Settings only if user is familiar with the Chipset and all the PCI Add-on
Cards functions.
38
ROM PCI/ISA BIOS (2A59ID1G)
PCI CONFIGURATION
AWARD SOFTWARE, INC.
: No PCI IDE IRQ Map To
: Manual Primary IDE INT#
: Disabled Secondary IDE INT#
: PCI/ISA PnP Used MEM base addr
: PCI/ISA PnP Used MEM Length
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
ESC: Quit
: PCI/ISA PnP
F1: Help
: PCI/ISA PnP
F5: Old Values (Shift)F2: Color
: PCI/ISA PnP
F6: Load BIOS Defaults
: PCI/ISA PnP
F7: Load Setup Defaults
: PCI/ISA PnP
Fig. 25
: PCI-AUTO
: A
: A
: C800
: 8K
↑↓→ ←: Select Item
PU/PD/+/-: Modify