Pci Configuration - DTK PAM-0057V User Manual

4.6

PCI CONFIGURATION

The PCI Configuration Setup option is used to configure the PCI add-on Cards on PCI
Slots. Without proper setup the PCI Add-on Cards might not function properly.
PNP OS Installed
Resources Controlled By
Reset Configuration Data
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
DMA-7 assigned to
Note: Change these Settings only if user is familiar with the Chipset and all the PCI Add-on
Cards functions.
ROM PCI/ISA BIOS (2A5LDG39)
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
: Yes CPU to PCI Write Buffer
: Manual PCI Dynamic Bursting
: Disabled PCI Master 0 WS Write
PCI Peer Concurrency
: Legacy ISA PCI Delay Transaction
: Legacy ISA
: PCI/ISA PnP PCI IRQ Actived By
: Legacy ISA PCI IDE IRQ Map To
: PCI/ISA PnP Primary
: PCI/ISA PnP Secondary IDE INT#
: PCI/ISA PnP
: PCI/ISA PnP
: Legacy ISA
: Legacy ISA
: PCI/ISA PnP
ESC: Quit
: PCI/ISA PnP
F1: Help
: PCI/ISA PnP
F5: Old Values
: PCI/ISA PnP
F6: Load BIOS Defaults
: PCI/ISA PnP
F7: Load Setup Defaults
: PCI/ISA PnP
Fig. 18
Award BIOS Setup Guide
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Level
: PCI-AUTO
IDE INT# : A
: B
? ? ? ? ? ? : Select Item
PU/PD/+/-: Modify
(Shift)F2: Color
33