Pci Configuration - DTK PRM-0081I User Manual

Reload Global Timer Event: When Enabled, an event occurring on each device listed below
restarts the global time for Standby Mode.
IRQ[3-7,9-15], NMI
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
Floppy Disk
Serial Port
Parallel Port
4.6

PCI CONFIGURATION

The PCI Configuration Setup option is used to configure the PCI add-on Cards on PCI
Slots. Without proper setup the PCI Add-on Cards might not function properly.
PNP OS Installed
Resources Controlled By
Reset Configuration Data
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
DMA-7 assigned to
Note: Change these Settings only if user is familiar with the Chipset and all the PCI Add-on
Cards functions.
ROM PCI/ISA BIOS (2A69KD1A)
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
: No PCI IDE IRQ Map To
: Manual Primary IDE INT#
: Disabled Secondary IDE INT#
: Legacy ISA Used MEM base addr
: Legacy ISA Used MEM Length
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
ESC: Quit
: PCI/ISA PnP
F1: Help
: PCI/ISA PnP
F5: Old Values
: PCI/ISA PnP
F7: Load Setup Defaults
: PCI/ISA PnP
: PCI/ISA PnP
Fig. 25
Award BIOS Setup Guide
: PCI-AUTO
: A
: B
: C800
: 8K
↑ ↓ → ←: Select Item
PU/PD/+/-: Modify
(Shift)F2: Color
25