13 WHEELS, TIRES
13.3
86
H00935-10
V00869-11
Removing the rear wheel
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease shaft seal rings
of the spacers.
Long-life grease (
p. 125)
–
Insert the spacers.
–
Clean and grease the wheel spindle.
Long-life grease (
p. 125)
–
Position the front wheel.
The brake linings are correctly positioned.
–
Insert the wheel spindle.
–
Mount and tighten screw
Guideline
Screw, front wheel
spindle
–
Operate the hand brake lever several times until the brake lin-
ings are seated correctly against the brake disc.
–
Remove the motorcycle from the lift stand. (
–
Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
3
Tighten screws
.
Guideline
Screw, fork stub
Preparatory work
–
Raise the motorcycle with a lift stand. (
1
and contact surfaces
2
.
M20x1.5
35 Nm (25.8 lbf ft)
p. 45)
M8
15 Nm (11.1 lbf ft)
p. 45)
A