Removing The Fuel Tank - KTM 85 SX 2022 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.30
60
Info
Over time, the fibers of the rock wool dissipate and the silencer "burns out".
Not only is the noise level higher, the performance characteristics change.
V01312-10

Removing the fuel tank

Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
–
Do not fuel the vehicle in the vicinity of open flames or lit cigarettes.
–
Switch off the engine for refueling.
–
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
–
If any fuel is spilled, wipe it off immediately.
–
Observe the specifications for refueling.
Preparatory work
–
Remove main silencer. (
Main work
–
1
Remove screws .
–
2
Take off outer tube .
–
Remove glass fiber yarn filling
–
Clean the parts that need to be reinstalled and check for dam-
age.
–
Mount the new glass fiber yarn filling on the inner tube.
Info
Mount the glass fiber yarn filling so that the thermal
protection foil is positioned on the right in the direction
of travel.
–
Slide outer tube over the inner tube with the new glass fiber
yarn filling.
Info
Seal the connecting cap
cone.
–
Mount and tighten the screws.
Guideline
Screw, main silencer
Finishing work
–
Install the main silencer. (
p. 59)
3 4
from inner tube
5
to the outer tube with sili-
M5 7 Nm (5.2 lbf ft)
p. 59)
.