11 SERVICE WORK ON THE CHASSIS
11.11
52
S04277-11
S04278-11
Checking the steering head bearing play
Warning
Danger of accidents Incorrect steering head bearing play impairs the handling characteristic and dam-
ages components.
–
Correct incorrect steering head bearing play immediately. (Your authorized KTM workshop will be glad
to help.)
Info
If the vehicle is operated for a lengthy period with play in the steering head bearing, the bearings and the
bearing seats in the frame can become damaged over time.
–
Clean and grease the wheel spindle.
Long-life grease (
p. 125)
–
Position the front wheel.
–
Insert the wheel spindle.
–
Mount and tighten screw
Guideline
Screw, front wheel
spindle
–
Position the brake caliper.
–
Mount and tighten screws
Guideline
Screw, front
M8
brake caliper
–
Position the brake line and the clamp. Mount and tighten
bm
screws
.
–
Remove the motorcycle from the lift stand. (
–
Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
bn
Tighten screws
.
Guideline
Screw, fork stub
Finishing work
–
Install front fender. (
p. 55)
–
Install the start number plate. (
–
Check that the wiring harness, throttle cables, and brake and
clutch lines can move freely and are routed correctly.
–
Check the steering head bearing play. (
–
Remove the motorcycle from the lift stand. (
–
Position the handlebar cushion and secure with a cable tie.
Preparatory work
–
Raise the motorcycle with a lift stand. (
bk
.
M20x1.5
35 Nm (25.8 lbf ft)
bl
.
25 Nm (18.4 lbf ft)
Loctite
p. 45)
M8
15 Nm (11.1 lbf ft)
p. 54)
p. 52)
p. 45)
p. 45)
®
243™