11 SERVICE WORK ON THE CHASSIS
11.19
11.20
11.21
56
Installing the shock absorber
A00044-11
Removing the seat
V00836-10
Mounting the seat
V00837-01
V00836-10
Main work
–
1
Push splash protector
absorber. Mount and tighten screw
Guideline
Screw, top
M12
shock absorber
–
Mount and tighten screw
Guideline
Screw, bottom
M12
shock absorber
–
Attach brake line.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Remove screw
.
–
Raise the rear of the seat, pull the seat back, and lift it off.
–
Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
to the side and position the shock
2
.
60 Nm (44.3 lbf ft)
Loctite
®
3
.
60 Nm (44.3 lbf ft)
Loctite
®
p. 45)
1
of the seat fixing.
M6
10 Nm (7.4 lbf ft)
2701™
2701™