Advertisement
Quick Links
Advertisement
Related Manuals for KTM 85 SX 2017
Summary of Contents for KTM 85 SX 2017
- Page 1 SETUP INSTRUCTIONS 2017 85 SX Art. no. 3213592en...
- Page 3 KTM accepts no liability for delivery options, devi- ations from illustrations and descriptions, misprints, and other errors.
-
Page 4: Means Of Representation
MEANS OF REPRESENTATION Symbols used The meaning of specific symbols is described below. Indicates an expected reaction (e.g. of a work step or a function). Indicates an unexpected reaction (e.g. of a work step or a function). Indicates a page reference (more information is provided on the specified page). Indicates information with more details or tips. - Page 5 SETUP Unpacking and setting up the vehicle – Remove the box and the plastic packaging. Info An assistant prevents the motorcycle from falling over. To avoid damaging the motorcycle during the setup, leave the protective film on the vehicle until you have finished. –...
-
Page 6: Tighten Screws
– Tighten screws Guideline Screw, fork stub 15 Nm (11.1 lbf ft) 201944-10 – Refuel. ( p. 7) – Prepare the vehicle according to the specifications in the KTM Dealer.net for han- dover to the customer. - Page 7 WORK Raising the motorcycle with the lift stand Note Danger of damage The parked vehicle can roll away or fall over. – Park the vehicle on a firm and level surface. – Raise the motorcycle at the frame underneath the engine. Lift stand (78929955100) Neither wheel is in contact with the ground.
- Page 8 WORK Guideline Screw, front wheel spindle M20x1.5 35 Nm (25.8 lbf ft) – Operate the hand brake lever several times until the brake linings are seated cor- rectly against the brake disc. – Remove the motorcycle from the lift stand. ( p.
- Page 9 WORK Warning Danger of poisoning Fuel is poisonous and a health hazard. – Avoid skin, eye and clothing contact with fuel. – Immediately consult a doctor if you swallow fuel. – Do not inhale fuel vapors. – In case of skin contact, rinse the affected area with plenty of water. –...
- Page 10 WORK Warning Environmental hazard Improper handling of fuel is a danger to the environment. – Do not allow fuel to enter the groundwater, the soil, or the sewage system. – Switch off the engine. – Open the filler cap. ( p. 6) –...
-
Page 11: Technical Data
TECHNICAL DATA chassis tightening torques – Spoke nipple M4.5 5 Nm (3.7 lbf ft) – Pin, front brake 8 Nm (5.9 lbf ft) – Pin, rear brake 4 Nm (3 lbf ft) – Remaining nuts, chassis 10 Nm (7.4 lbf ft) –... - Page 12 SUBSTANCES Engine oil, 2-stroke Standard/classification – JASO FD ( p. 12) Guideline – Only use high grade 2-stroke engine oil of a reputable brand. Fully synthetic Recommended supplier Motorex ® – Cross Power 2T Super unleaded (ROZ 98 / RON 98 / PON 94) Standard/classification –...
-
Page 13: Auxiliary Substances
AUXILIARY SUBSTANCES Long-life grease Recommended supplier Motorex ® – Bike Grease 2000... - Page 14 STANDARDS JASO FD JASO FD is a classification for a 2-stroke engine oil that was specifically developed for the extreme demands of racing. Thanks to first rate synthetic esters and specially designed additives, superb combustion is achieved even under extreme operating conditions.
- Page 15 *3213592en* 3213592en 09/2016 KTM Sportmotorcycle GmbH 5230 Mattighofen/Austria Photo: Mitterbauer/KTM http://www.ktm.com...