14 COOLING SYSTEM
14.9
96
V00832-11
V00870-10
Changing the coolant
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or other cooling system components if the engine or the
cooling system are at operating temperature.
–
Allow the cooling system and the engine to cool down before you open the radiator, the radiator hoses
or other components of the cooling system.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.
Main work
–
1
Make sure that screw
–
Position the motorcycle upright.
–
2
Take off radiator cap
.
–
Completely fill the radiator with coolant.
Coolant (
p. 123)
–
3
Loosen screw
until coolant escapes without bubbles.
–
Mount and tighten screw
Guideline
Screw, radiator
bleeding
–
Completely fill the radiator with coolant.
Coolant (
p. 123)
–
2
Mount radiator cap
.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Allow the engine to warm up and cool down again.
–
Check the coolant level. (
Finishing work
–
Check the cooling system for leaks.
is tightened.
3
.
M6
8 Nm (5.9 lbf ft)
p. 94)