11.16
Removing front fender
11.17
Installing front fender
11.18
Removing the shock absorber
Preparatory work
–
Remove the start number plate. (
Main work
–
Remove screws
–
Remove screws
V00830-10
Main work
–
Position front fender.
–
Mount and tighten screws
Guideline
Screw, front fender
–
Mount and tighten screws
Guideline
Screw, front fender
V00831-10
Finishing work
–
Install the start number plate. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Detach the brake line from the brake line guide.
–
Remove screw
as far as possible without blocking the rear wheel. Secure the
rear wheel in this position.
–
Remove screw
remove the shock absorber.
A00044-10
SERVICE WORK ON THE CHASSIS 11
p. 54)
1
.
2
. Take off the front fender.
1
.
M6
6 Nm (4.4 lbf ft)
2
.
M6
6 Nm (4.4 lbf ft)
p. 54)
1
and lower the rear wheel with the link fork
2
3
, push splash protector
p. 45)
to the side, and
55